LOM - Linux On Module Project


中文

English      
     
                 
           
 

LOM-ARM9 Evaluation Board


   

>>LOM-ARM9 is an ATmel AT91RM9200(ARM920T) Evaluation Board, It is only assembled necessary components for running ARM-Linux. User's expanded hardware board can be connected to LOM-ARM9 Board via the two 80 pin signal sockets.

                   
   
  • AT91RM9200 180Mhz
  • 32Mb SDRAM
  • 64Kb EEPROM
  • 1M byte Flash(option)
  • one 10/100M Network Port
  • one USB Host Port
  • one USB Device Port
  • one simple UART
  • 5V/800mA Power supply
  • two 80 pin signal sockets
  • Running OS:ARM-Linux (2.4.x)
   
    Click for more and new messages about LOM-ARM9 Evaluation Board.    
                   
             
 

LOM-ARM7 Evaluation Board


    >>LOM-ARM7 is an Samsung S3C4510B(ARM7TDMI) Evaluation Board, It is only assembled necessary components for running uCLinux. User's expanded hardware board can be connected to LOM-ARM7 Board via the two 80 pin signal sockets.
   
  • S3C4510B 50Mhz
  • 16M Byte SDRAM
  • 2M Byte NOR Flash
  • one simple UART
  • one 10/100M network Port
  • 14Pin JTAG Port
  • 1个WDG(sp706t)
  • 5V/800mA Power Supply
  • two 80 pin signal sockets.
  • Running OS : uClinux 2.4.x
   
    Click for more and new messages about LOM-ARM7 Evaluation Board.  
                   
    My first ARM7 Evaluation Board Base on Samsung S3C4510B. Its PCB board is a double layer board. Guys who like DIY can download the PCB file for PCB board maching.The board runs uClinux-2.4.x well. All the stuff for this board is free.    
    Click for more and new messages about this ARM7 Evaluation Board.    
 
   

Some stuff about 8-bit Microcontroller

   

   

>>Some source codes for MC-S51 and ATmel AVR microcontroller.All is tested.

    Click for more and new messages about 8 bit Micro Controller.
               
           
   

More Stuff ...

 

   
>>I will post more stuff on website when I have spare time...
     
               

 
   
     
   
        Any problems with this web site please contact the Webmaster